The Best Signal Splitter of 2022

After hours of researching and comparing all models on the market, we find out the Best Signal Splitter of 2022. Check our ranking below.

Disclaimer: As An Amazon Associate We Earn From Qualifying Purchases.

Our Picks For The Top Signal Splitter


Bestseller No. 1
GE Digital 2-Way Coaxial Cable Splitter, 2.5 GHz 5-2500 MHz, RG6 Compatible, Works with HD TV, Satellite, High Speed Internet, Amplifier, Antenna, Gold Plated Connectors, Corrosion Resistant, 33526
  • Multi Purpose – This Digital Coax Splitter Is Designed For Use With Hd Tv Signals, Satellite Tv, And High Speed Internet Modems As Well As Cable Tv, Amplified Antennas, Amplifiers, And Other Coaxial Devices.
  • Frequency Range – Distributes A Digital Signal Of 2.5 Ghz (5-2500 Mhz) Frequency Range
  • 2 Outputs – Splits A Single Digital Signal To Up To 2 Devices, Balanced, And With Power Pass Through On All Ports.
  • Gold Plated Connectors – Allows For Optimal Connectivity, Corrosion Resistance, And Compatible With Rg59 And Rg6 Coax Cable.
Bestseller No. 2
GE 4-Way TV Antenna Amplifier Splitter Clears Up Pixelated Low-Strength Channels Distributes Signal to Multiple TVs 50-1006MHz Low Noise Antenna Signal Booster HD Digital VHF UHF Indoor 34479
  • SIGNAL BOOSTER – This amplifier will enhance and strengthen the signal received by your indoor/outdoor non-amplified passive TV antenna. Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers.
  • 4-WAY SPLITTER – Works with all brands of TVs and passive antennas to distribute one audio/video source to up to four devices with F-type coaxial connectors. This will require coaxial cable (sold separately).
  • EASY INSTALLATION – Simple to set up and comes with an AC power adapter user manual and installation instructions.
  • U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8PM, Central Time to assist with any questions or issues.
Bestseller No. 3
Lehle P-Split III Passive Signal Splitter
  • Passive splitter and DI box
  • Absolutely no signal loss or hum
  • High-impedance LEHLE TRANSFORMER HZ with phase and ground switch
  • Suitable for balanced or unbalanced signals
Bestseller No. 4
FERRISA 4x2 HDMI Matrix Switch,4 in 2 Out Matrix HDMI Video Switcher Splitter +Optical & L/R Audio Output,Support Ultra HD 4K,3D 1080P,Audio EDID Extractor with IR Remote Control
  • 【4 IN 2 OUT Matrix】This HDMI Matrix can connect up to 4 HD Source to 2 HDMI Display terminals with optical fiber or stereo headphone output,it allows four HDMI devices to be switched or split easily to two HDMI compatible monitors or projectors.Ideal solution for home theater, office, school, conference room, shopping mall, hotel or museum
  • 【High Resolution】Supports a multitude of video resolutions, including 4K x 2K, 1080P, Ultra HD, 3D, HD audio and etc.Supports 8/10/12 bit deep color. Support HDMI 1.4b and HDCP1.4,Support 3.4Gbps x3 data rate and tmds clock up to 340Mhz
  • 【Audio Split&EDID】Supports LPCM/Dobly/DTS 5.1 channel and smart EDID management.Any input HD source can do audio extract by the SPDIF or 3.5mm headphone audio output port separately or at the same time.Built-in IR sensor comes with a handy, intuitive remote control that makes switching inputs,it can do also switch by press button. Note: AAA battery needed,and pls confirm your audio format is correct
  • 【Premium Quality】This 4x2 HDMI Matrix contains in-built automatic equalization and amplification to ensure optimum transmission without loss in video/audio quality.It is embedded with ESD protection,and has been passed thousands of hours of tests under different and sophisticated applications which include security systems, outdoor advertising screens, broadcasting stations, and public theaters etc
  • ★LIFTIME WARRANTY:We guarantee you a 1 year Money Back Zero Risk purchase.If you have any questions, just contact us via Amazon,your issues is our biggest concern
Bestseller No. 5
ASI ASI451124 Single Channel Dual Output Analog Signal Isolator Transmitter Splitter, 3-Way Isolation, DIN Rail Mount, Single 4-20 mA Input, Dual 4-20 mA Output
  • Analog Signal Isolator with single input with dual output
  • Zero and span adjustment for precise calibration
  • 3-Way isolation to eliminate interference
  • DIN rail mounting and pluggable terminals for quick installation Screw Clamp terminations for easy wiring
SaleBestseller No. 6
9 Port Bi-Directional Cable TV Splitter Signal Booster/Amplifier with Active Return Zero Signal Loss VoIP Telephone Bypass Port and F59 Terminators Antronix VR900B/AC
  • Compare to Electroline EDA-FT08300 or PCT VC9U. Provides 8 amplified output ports with Active Return.All ports are LOSSLESS both forward and reverse. This is a true lossless 8-port splitter.
  • MODEM port provides a connection point for VoIP equipment, so that a power failure will not affect services. Compatible with all standard and digital Cable TV services, including the "Triple Play" phone service.
  • All models equipped with CamPort auto seizing F-ports.The all ports facing down configuration provides clean wiring in any orientation.
  • 6 kV Surge Protection and PTC Short-Circuit Protected UL Listed Adaptor - Unique surge protection provided on all RF ports. Self-resetting circuit protection provides safe protection against short-circuits.
  • Powder Coated Aluminum Housing - Provides the most corrosion resistant protection against salt fog and rust. 5-year manufacturer warranty on amplifier only - not power supply. Does not include connection cables. Includes three F59 terminators.
Bestseller No. 7
4-Port Cable TV/Antenna/HDTV/Internet Digital Signal Amplifier/Booster/Splitter with Passive Return, Black Coax Power Cable, F59 Terminators (Antronix MRA4-8)
  • Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception.
  • Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards. 3 dB Noise Figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters.
  • 6 kV surge protection for protection against lightning strikes. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. 1 Year Warranty.
  • PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times.
  • Kit includes Amplifier, Power Supply, 36 inch custom super-flexible power cable, and two 75-ohm port terminators. Note: The included cable is for power only, not for cable TV signals.
Bestseller No. 8
9 Port Bi-Directional Cable TV Splitter Signal Booster/Amplifier Kit with Active Return Zero Signal Loss VoIP Telephone Bypass Port includes F59 Terminators and 3' Custom Dedicated Power Cable
  • Compare to Electroline EDA-FT08300 or PCT VC9U. Provides 8 amplified output ports with Active Return.All ports are LOSSLESS both forward and reverse. This is a true lossless 8-port splitter.
  • MODEM port provides a connection point for VoIP equipment, so that a power failure will not affect services. Compatible with all standard and digital Cable TV services, including the "Triple Play" phone service.
  • All models equipped with CamPort auto seizing F-ports.The all ports facing down configuration provides clean wiring in any orientation.
  • 6 kV Surge Protection and PTC Short-Circuit Protected UL Listed Adaptor - Unique surge protection provided on all RF ports. Self-resetting circuit protection provides safe protection against short-circuits.
  • Powder Coated Aluminum Housing - Provides the most corrosion resistant protection against salt fog and rust. 5-year manufacturer warranty on amplifier only - not power supply. Complete kit includes Amplifier, Power Supply, three F59 terminators and Reliable Cable Superflex power connection cable.
Bestseller No. 9
gofanco Prophecy 1x4 HDMI Extender Splitter 1080p Over Cat5e/Cat6/Cat7 Ethernet Cable with HDMI Loopout - Up to 50m/165ft - EDID Management, Bi-Directional IR Remote Control (1 in 4 Out / 4-Port)
  • ✔ COMPLETE 1080p KIT - Includes 1 Transmitter & 4 Receivers. Extend and distribute 1 HDMI source to 4 HDMI displays over CAT5e/6/7 simultaneously. Embedded Silicon Image chipset for best quality, compatibility and reliability
  • ✔ HDMI LOSSLESS TRANSMISSION - Extends HDMI audio/video signals to synchronous output video display(s), is as fluent as direct connection; Supports up to 50m (165ft) at 1080p@60Hz with CAT5e/6/7 and surround sound up to 7.1-channel or stereo digital audio; Compatible with HDCP compliant devices & content. * Good quality CATx cables are essential in delivering quality content
  • ✔ HDMI LOOP-OUT & EDID MANAGEMENT - The transmitter couples as a splitter as it is equipped with an HDMI out port to connect to a local display (5th display) for monitoring purposes or cascade HDMI signals to 4 layers; Easy-to-follow EDID configurations (nine built-in EDID resolution options) via DIP switches allow you to experience audio and video in the highest settings possible based on the capabilities of your display
  • ✔ ADVANCED FEATURES - Bi-Directional IR Remote Control allows you to remotely control a media player/ device from the TV side or control a TV from the device side
  • ✔ EASY INSTALLATION - No driver required; Surface mountable metal housing allows easy placement; Sturdy metal enclosure provides durability and minimizes EMI/RFI noise interference. FCC, CE & RoHS compliant. Our products are backed with a 1-year limited warranty and experienced tech support team in Silicon Valley. If you have any questions or concerns, please do not hesitate to contact us by clicking "gofanco" after "Sold by" then clicking "Ask a question"
SaleBestseller No. 10
ASI ASI451141 4-20mA Analog Signal Splitter, 1 Input, 4 Output
  • 4-20mA Single input with quad output Analog Signal Splitter
  • 3-Way isolation between power supply, input and each of the 4 outputs to eliminate interference
  • Din rail mounting for quick installation
  • Zero and span adjustment for precise calibration
  • Screw clamp terminations for easy wiring


How Do You Buy The Best Signal Splitter?


Do you get stressed out thinking about shopping for a great Signal Splitter? Do doubts keep creeping into your mind? We understand because we’ve already gone through the whole process of researching Signal Splitter, which is why we have assembled a comprehensive list of the greatest Signal Splitter available in the current market. We’ve also come up with a list of questions that you probably have yourself.


We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Signal Splitter that you consider buying. Your questions might include the following:

  • Is it worth buying an Signal Splitter?
  • What benefits are there with buying an Signal Splitter?
  • What factors deserve consideration when shopping for an effective Signal Splitter?
  • Why is it crucial to invest in any Signal Splitter, much less the best one?
  • Which Signal Splitter are good in the current market?
  • Where can you find information like this about Signal Splitter?

We’re convinced that you likely have far more questions than just these regarding Signal Splitter, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.


Potential sources can include buying guides for Signal Splitter, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best possible Signal Splitter. Make sure that you are only using trustworthy and credible websites and sources.


We provide an Signal Splitter buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Signal Splitter currently available on the market.


This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:


  1. Brand Value: Every brand of Signal Splitter has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Signal Splitter?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: his simply is how much bang for the buck you get from your Signal Splitter.
  5. Customer Ratings: Number ratings grade Signal Splitter objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Signal Splitter.
  7. Product Quality: You don’t always get what you pay for with an Signal Splitter, sometimes less, and sometimes more.
  8. Product Reliability: ow sturdy and durable an Signal Splitter is should be an indication of how long it will work out for you. .

We always remember that maintaining Signal Splitter information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.


If you think that anything we present here regarding Signal Splitter is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us page.

Related Posts